instructions

1. Zf75-150 vibrator has high frequency, high power, small amplitude, high efficiency and small volume.

2. Adopt quick loading and unloading structure, only one screw is needed to fix the formwork, and the loading and unloading time of a single set is about 40s, which greatly saves loading and unloading time and manpower

3. During the use, with its main power supply (3-phase 380V / 167hz), it can excite 3545 seconds each time.

4. It should be noted that the evenness of concrete materials should not be too different, and the slump should be appropriate.

5. Keep in mind that the vibration time is not easy to be too long, otherwise the concrete is easy to produce segregation and affect the quality.

6. When the vibrator is transported or placed in a long distance cabinet, the insulation resistance shall be tested (with a megger) and the value shall not be less than 2 megohm.

7. During the use, attention shall be paid to the phase loss (outgoing line disconnection) of the motor, so as to avoid burning out the motor and damaging the power supply.

8. Vibrators shall not be stored in damp places. Otherwise, it is easy to burn the motor.

9. The vibration motor is used with multi-functional power cabinet, which has better effect and longer service life.

10. It can be widely used in concrete tamping construction and other occasions requiring vibration source. High frequency vibrator is mainly used in: high speed railway construction, highway construction, track plate factory and bridge factory

Special reminder

Because the vibration motor adopts the planetary flow principle,

After electromagnetic conversion, the vibration frequency is generated between the rotor and the vibration sleeve of the motor, so the motor is easy to generate heat and the service life is limited. Remind users to purchase a certain quantity when purchasing, do not bring unnecessary trouble to the constructor, thank you for cooperation!